A chainsaw is a fairly useful and necessary device in the farm, it means of course, if you live in a country -type house. Using a chainsaw, you can prepare firewood for the winter, and also put in order all fruit trees in the garden.
Of course, some people are used to using a regular hacksaw, but you won’t cut a hacksaw, say, dried apple. However, it is important to understand that chainsaws are enough “capricious” tool, which requires constant care, sharpening and refueling.
But if you sharpen the teeth of the chainsaw not everyone can do it, then the dressing of the chainsaw with their own hands is quite feasible, and about this, we will talk today.
First you should understand that the process of refueling a chainsaw and oil, this is not at all refueling ML cartridges for printers. First you should open a technical passport of the chainsaw and find out from it what kind of oils and gasoline of which particular brand it is worth refueling your chainsaw. After the information you need was found in the technical documentation, and the necessary materials were purchased in a store or in the market, you can start refueling a chainsaw.
Perhaps, we start with how to season the chainsaw with oil, since this moment requires more attention. To do this, put the chainsaw on an even surface so that the oil tank is located with a pouring hole upward. So a drop will be depicted on the oil tank – it is in this tank that you need to fill in the oil. After you have tucked the chainsaw of oil, carefully wipe the oil tank with dry rags, and then tightly tighten the lid of the oil tank.
The gas station refueling with gasoline is almost similar to the gas station refueling with oil, but this time we need to do the same operation with a fuel tank, which, as a rule, is drawn with a canister with fuel. After you have tucked the chainsaw, the fuel tank should also be wiped and tightly tighten the lid on it.
As you can see, the gas station refueling operations with gasoline and oil are quite simple, and you can do it yourself at home.
