Many who are repairing the room can make a figured ceiling. In appearance, he is beautiful and emphasizes the overall design of the room. The work is quite complicated, so you need to stock up on.
The structure of the structure is made from galvanized profiles, to which curly ceilings will then be attached. The profile should be indicated by the CD 60×27 and UD index 27 mm. The guide of this profile with the UD index, the Central House of Sciences will be inserted into it. This material must be purchased high -quality, because it’s easier to work with it.
First you need to mark the walls and ceiling, using a pencil and level. With a pencil, you need to draw the boundaries of the future structure. Immediately after the marking, it is necessary to start fixing the UD profile along the edges of the structure and on the wall, and on the ceiling.
Cut the profile with special scissors. Use gloves so as not to cut hands. Special dowels are attached to the wall. With self -tapping, the profile is connected to each other. After installing the structure, it is necessary to cut the ced of the desired length and connect from the ud. Then the bends are cut out, for this purpose, they bend the bending for the bend, and the cuts must be done in advance. From the profile you can make any bends. After completion, the structure must be covered with a primer and putting it, and then you can decorate its design.
